To keep your vehicle's battery in good condition, it is important to charge it regularly. As the battery's energy continues to decrease, the loss of power may cause irreversible damage to the battery.

The AUTOOL BT380 is a battery tester that supports the charging and testing of vehicle batteries. It uses the most advanced conductivity measurement technology, making it easy, fast and accurate to test the vehicle cranking system, charging system, and vehicle battery, as well as to charge 12V vehicle battery.

It is a great companion for your car battery. Support battery charging It is a professional car battery testing product.

It can not only support battery charging but also display battery power, check battery health, charging ability, starting ability, ripple test, etc.

These useful features provide multiple safeguards for your car's battery health. Synchronize various data After entering the battery charging program, the tester will display the voltage, current, charging power and charging time of the tester. All data is clear at a glance, allowing you to easily grasp all information about the battery charging status.

Wide compatibility and application The AUTOOL BT380 battery tester is available for testing regular lead acid batteries, AGM flat, AGM spiral or gel batteries. Perfect for 12V cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, lawn mowers, even golf carts and more. CCA - Cold-Cranking Amps, specified by SAE. Test range: 40-2000A. BCI - International Battery Council Standard. Test range: 40-2000A. CA - Cranking Amps Standard. Effective starting current value at 0°C (32°F). Test range: 40-2000A. MCA - Marine Cranking Current Standard. Effective starting current value at 0°C (32°F).

Test range: 40-2000A. JIS - Japanese Industrial Standard, displayed on the battery as a combination of numbers and letters. Test range: 26A17-78550. DIN - Deutsche Industrial Standard. Test range: 40-1400A. IEC - International Electrotechnical Commission.

Test range: 40-1400A. EN - European Standard. Test range: 40-2000A. SAE - Society of Automotive Engineers. Test range: 40-2000A. GB - China National Standard. Test range: 3-220AH. Instruction of the test report Good battery There is no problem with the battery, please rest assure! Note: SOH means state of health; SOC means state of charge Good battery, needs to be charged The battery is good, but the current is low, please charge it before use.

The battery has reached the critical value, and it is recommended to replace it The battery is approaching or has reached the end of its service life and needs to be replaced as soon as possible. Bad battery, must be replaced There is damage inside the battery, the battery is broken or shorted, and the battery needs to be replaced.

The battery needs to be charged Unstable batteries should be recharged and retested to avoid errors.

If the test results are the same and this prompt still appears after charging, it is considered that the battery is damaged and the battery needs to be replaced. Cranking test Start the engine as prompted, the tester will automatically complete the cranking test and display the results. If the cranking voltage value is higher than 9.6V, the cranking system is determined to be working normally.

The test results of the tester include the actual cranking voltage and the actual cranking time. It also displays the battery test result at the same time even if the cranking test is abnormal. This is to help maintenance personnel quickly determine the overall status of the starting system based on the data.

When the test is complete, do not turn off the engine and press the OK button to enter the charging test. Charging test When entering the charging test, the tester will perform the following corresponding operations in sequence.

The engine speed will be increased to 2500 rpm or above and held there for 5 seconds. After the charging voltage test starts, the rotation detection is added. After the test is completed, the tester displays the effective charging voltage, ripple test results and charging test results. Check the connection between the alternator and the battery and retest.

Reverse polarity protection It has a reverse polarity protection device. In case of carelessly reversing the battery tester power connector, there is no need to worry about damaging the tester or affecting the vehicle and battery.

Thoughtful features are designed for better protection of the vehicle, battery and tester. 2.4-inch LCD screen allows clear data browsing In contrast to most monochrome LCD screens on the market, the AUTOOL BT380 battery tester comes with a 2.4-inch LCD screen that is easy to read in direct sunlight and allows testing even in dark places.

Packing List 1pc* AUTOOL BT380 Car Battery Tester main unit 1pc* Power cable 1pc* User Manual 1pc* Certificate