Product Features:

1.Complete hardware, ready to use: No additional assembly is required. The kit includes a full set of equipment, including actuators (stepper motor, lead screw slide), feedback components (encoder), and safety detection (proximity switch). It meets the full-range learning needs from basic jogging to precise positioning;

2.Focus on core principles: It drives the stepper motor to drive the lead screw slide to achieve linear motion. Cooperated with the encoder to feedback position deviation in real time and the proximity switch to detect the limit position, it intuitively helps users understand the closed-loop control logic of "instruction - execution - feedback - correction" and quickly master the core mechanism of industrial automation positioning control.

Parameters:
Economy model.
Dimensions: 350*60*80mm.
Effective stroke:220mm.
Stepper motor: Current 1.2A, 200 pulses per circle.
Lead screw pitch: 8mm per circle.
Sensor: NPN DC 3 - wire normally open type; Sensing distance 4mm; Sensing surface diameter ±14mm; Load current 200mA; Operating voltage DC 10 - 30V; Cable length 1.2m.
Encoder: Body outer diameter 38mm; Cable length 1m; Shaft diameter 6mm; Photoelectric incremental AB two - phase, 600 pulses per circle; Operating voltage DC 12 - 24V.
Drive: The pulse direction enable port does not require a series resistor.